Planning Your Ozone Generator Installation

Proper ozone generator installation is critical for achieving effective treatment performance and safe operation. This guide covers the essential steps for air treatment, water treatment, and combined systems.

Step 1: Site Assessment

Before installation, evaluate: room volume or water flow rate, target ozone concentration, temperature and humidity, power supply availability, ventilation rates, and safety requirements.

Step 2: Equipment Selection

Choose generator capacity based on calculations: Ozone Output (g/h) = Target Concentration (g/m³) × Volume (m³) ÷ Contact Time Factor. Always oversize by 20-30% to account for efficiency losses.

Step 3: Air Treatment Installation

• Mount unit at ceiling height or use wall brackets

• Ensure even ozone distribution via ductwork or fans

• Install ozone monitor at breathing zone level (1.5m height)

• Connect exhaust/ventilation for excess ozone removal

• Install automatic shut-off linked to occupancy sensors

Step 4: Water Treatment Installation

• Install venturi injector in main water line

• Add contact tank (3-5 minute residence time for water)

• Install ozone destruct unit to remove residual ozone

• Add dissolved ozone monitor for process control

• Ensure proper backflow prevention

Step 5: Electrical and Control Wiring

Follow NEC codes for ozone generator electrical installation. Install emergency stop buttons, remote monitoring capability, and automatic timers for scheduled treatment cycles.

Step 6: Testing and Commissioning

After installation: verify ozone output with a calibrated analyzer, test all safety interlocks, confirm contact time and concentration targets, document baseline performance metrics.

Conclusion

Proper ozone generator installation ensures optimal performance and safety. TongLin Technology provides professional installation support and equipment for all applications.